|
|
PART
NO |
DESCRIPTION |
STATUS |
OUR
PRICE |
BUY
NOW! |
Installed view |
RAM-234-3U |
RAM
Universal Laptop Mount Tough Tray
Spring loaded expandable tray that can accommodate 10 to 16 inch
wide laptops. The tray includes four (4) side clamping arm with
rubber grip feature. These arms can be moved both vertically and
horizontally. This allows for a custom fit for varying thicknesses
of laptops and the freedom of not blocking ports or drives. Hole
patterns on perimeter of tray facilitate the mounting of additional
RAM systems to support GPS, PDAs or other electronics. NOTE: Works
with 17" screens.
Click
here for other laptop mounting options. |
|
|
|
 |
RAM-234-4U |
RAM
Rear Seat Laptop Mount . |
|
|
|
 |
|
RAM
Universal Laptop Mount Tough Tray II
For compact laptops. |
|
|
|
Larger
view |
RAM-234-SNMU |
RAM
Safe-n-Secure Motion Kit for Tough Tray
Includes 4 front & rear retaining arms & 1 Safe-n-Secure locking kit. |
|
|
|
 |
RAM-234-5U |
RAM Power Caddy
Will allow most any brand or combination of
power supply to be contained alongside your laptop. Keep your laptop
charged and also run additional peripherals like printers, fax machines,
etc. all with your own factory supplied power supply or combinations
of most aftermarket AC inverters, DC power supplies and or AC/DC
power adapters. Easily attaches to the RAM Tough Tray Laptop Platform. |
|
|
|
Installed
view |
RAM-234-S1U |
Laptop
Screen Support, flexible arm
The base of the arm is a plastic diamond plate that
connects to the holes found on the side of the Laptop Tray (RAM-234-3).
At the top of the arm is a "n" shaped hook that sits over the top
of your laptop screen. The arm that connects the two ends is a semi-stiff
plastic coated flexible arm. The flex arm is 15" long, but the total
length is 17". |
|
|
|
 |
RAM-234-S2U |
Laptop
Screen Holder
The base of the arm
connects to the holes found on the side of the Laptop Tray (RAM-234-3). This arm is spring loaded and made of solid plastic. |
|
|
|
 |
RAM-234KU |
Universal Laptop Tray Side Keeper
Have you lost side claming leg from your RAM-234-3 laptop tray? The RAM-234K is the replacement piece! |
|
|
|
 |
RAM-234K1-4U |
4 Universal Laptop Tray Side Keepers
Attaches to the RAM-234-3 Tough Tray & allows you to completely close your laptop while it is in the tray. |
|
|
|
|
RAM-234R1-4U |
4 Universal Laptop Tray Front & Rear Retainer Arms
Attaches to the RAM-234-3 Tough Tray & allows you to completely close your laptop while it is in the tray. |
|
|
|
|
RAM-VB-REM1U
 |
DISCONNECT
ADAPTER, FOR RAM VEHICLE LAPTOP TELE-POLE SYSTEMS
This component allows any RAM Vehicle Laptop Tele-Pole
System to be easily removed: pull the spring loaded locking safety
pin and the entire Tele-Pole with Laptop System is easily removed
from the vehicle base. What is left is a small discrete vehicle
base, with Quick Release Male Spud. Retro-fit it to any new or existing
system in minutes. Enjoy the convenience of completely removing
your RAM Laptop Mount, leaving the maximum amount of room for passengers
and or other items that require cargo space. |
|
|
|
Click here for larger photo
|
RAM-234-LU |
Laptop Light
A USB powered laptop light with a flexible 16" long gooseneck. The light is 1.25" and can be angled over your keyboard to make typing easier in low light situations. |
|
|
|
RAM
1.5" BALL & SOCKET ASSEMBLIES (Components available separately
too, see below) |
 |
RAM-101U |
Double
ball & socket Mount, 1.5" balls
4.63"
C arm with RAM-202 (1.5" ball with 2.5" base) at each
end. Can also be used on top of a RAM-316-3A POD III mount |
|
|
|
 |
RAM-101-DU |
Double
ball & socket Mount, 1.5" balls
7.88
" D arm with RAM-202 (1.5" ball with 2.5" base) at
each end. |
|
|
|
 |
RAM-111-BU |
Universal
Electronics Mount, Short Arm
RAM-111B
2" x 6.25" plate & 1.5" ball; RAM-201-B Arm 2.25"
long for 1.5" balls; RAM-202 1.5" ball 2.5" diameter
base
Can also be used on top of a RAM-316-3A POD III mount |
|
|
|
 |
RAM-111U |
Universal
Electronics Mount, Medium Arm
RAM-111B
2" x 6.25" plate & 1.5" ball; RAM-201 Arm 4.63"
long for 1.5" balls; RAM-202 1.5" ball 2.5" diameter
base
Can also be used on top of a RAM-316-3A POD III mount |
|
|
|
 |
RAM-111-DU |
Universal
Electronics Mount, Long Arm
RAM-111B
2" x 6.25" plate & 1.5" ball; RAM-201 Arm 7.88"
long for 1.5" balls; RAM-202 1.5" ball 2.5" diameter
base
Can also be used on top of a RAM-316-3A POD III mount |
|
|
|
 |
RAM-134-90U |
Pipe
Pedestal Mounting System
RAM-111B
2" x 6.25" plate & 1.5" ball; RAM-201 arm for
1.5" balls; RAM-218-1 with 0.5" NPT female threads &
1.5" ball; RAM-PA-8206 6" long pipe with 0.5" male
threads; RAM-232-90 base with 0.5" NPT female threads |
|
|
|
 |
RAM-161-BU |
RAM
Bi-Pod base & Socket Arm
RAM
Bi-Pod base with 1.5" double ball and socket arm RAM-201 and
RAM-202 1.5" ball 2.5" diameter base for top attachment |
|
|
|
RAM-161-BLU
(Unpacked)
|
RAM
Tri-Pod Leg for RAM-161-B Mount
Support
leg to attach to the side of the base of RAM-161-B to provide lateral
support
(Unpacked = no packaging + lower cost) |
|
|
|
|
SWING
ARM MOUNTS |
 |
RAM-109H-1U
|
Horizontal
Swing Arm Mount
Horizontal
swing arm base; Extension Arm with 3" bolt; Extension Arm with
4" bolt; RAM-111B 2" x 6.25" plate & 1.5"
ball. For horizontal surfaces |
|
|
|
 |
RAM-109H-2U
|
Horizontal
Swing Arm Mount
Horizontal
swing arm base; Single swing arm with 1.5" ball; RAM-201 Arm
4.63" long for 1.5" balls; RAM-111B 2" x 6.25"
plate & 1.5" ball. For horizontal surfaces |
|
|
|
 |
RAM-109VU |
Vertical
Swing Arm Mount
Vertical
swing arm base; Extension Arm with 3" bolt; RAM-111B 2" x 6.25" plate & 1.5"
ball. For vertical surfaces |
|
|
|
 |
RAM-109V-1U
|
Vertical
Swing Arm Mount
Vertical
swing arm base; Extension Arm with 3" bolt; Extension Arm with
4" bolt; RAM-111B 2" x 6.25" plate & 1.5"
ball. For vertical surfaces |
|
|
|
 |
RAM-109V-2U
|
Vertical
Swing Arm Mount
Vertical
swing arm base; Single swing arm with 1.5" ball; RAM-201 Arm
4.63" long for 1.5" balls; RAM-111B 2" x 6.25"
plate & 1.5" ball. For vertical surfaces |
|
|
|
 |
RAM-B-316-1U |
RAM POD I with 1" Single Socket Arm
18" flex arm attaches to 1" RAM ball mount component on one end and a seat rail on the other. |
|
|
|
 |
RAM-316-3AU
|
POD
III Universal Vehicle Mount
Fits
most any vehicle. Mounts laptops, tablets, keyboards etc. For swing
arm attachment use with RAM-316-T. For socket arm attachment use
with RAM-101 or RAM-111 |
|
|
|
 |
RAM-B-316-121BU |
RAM POD I Universal Mount with Clamp Base with No Ball
The EZ-ON/OFF™ Flexible Seat Clamp Mount quickly and easily attaches to the seat frame and includes a flexible rod allowing for a custom fit. Flex Arm Length:
18" |
|
|
|
 |
RAM-B-316-121B-238U |
RAM POD I Universal Mount with Clamp Base Connecting to Diamond Base
The EZ-ON/OFF™ Flexible Seat Clamp Mount quickly and easily attaches to the seat frame and includes a flexible rod allowing for a custom fit. The diamond base and ball has 2 holes, that match the universal AMPS hole pattern, positioned at 1.912'' from center to center.
Flex Arm Length:
18" |
|
|
|
 |
RAM-316-TU |
RAM
Single POD Post with 2.5" diameter base
This
mounting post is designed for use with RAM-316-A. The base attaches
directly to the RAM-316-A. A RAM-261-1 or swing arms can be attached
to the post. |
|
|
|
 |
RAM-261U |
RAM
Aluminum Single 6'' Swing Arm with Single 1.5'' Socket
Can connect directly to RAM-316-T |
|
|
|
 |
RAM-261-1U |
RAM
Aluminum Single 6'' Swing Arm Extension with Pipe Connection
Use to extend RAM-261 |
|
|
|
 |
RAM-261-2U |
RAM
Aluminum Single 6'' Swing Arm with Double 1.5'' Ball
Can connect directly to RAM-316-T Add RAM-201 or RAM-201-B arms
|
|
|
|
 |
RAM-160-BU
|
Seat
Rail Mounting System with double ball & socket joint
Use
existing bolts on passenger side seat. Raise or lower arm to provide
perfect functional height (approx 30" max) Height adjustable
vertical bar has a RAM-218-1 ball at the top, connected to a RAM-201
arm and RAM-202 circular plate for attachment to a laptop tray or
other support. |
|
|
|
 |
RAM-160-1U
|
Seat
Rail Mounting System with single swing arm
Use
existing bolts on passenger side seat. Sliding removable arm secures
pedestal housing. Raise or lower the single swing arm to provide
perfect functional height (approx 30" max) |
|
|
|
 |
RAM-160-2U |
Seat
Rail Mounting System with double swing arm
Use
existing bolts on passenger side seat. Sliding removable arm secures
pedestal housing. Raise or lower the double swing arms to provide
perfect functional height (approx 30" max) |
|
|
|
 |
RAM-109-1ATU |
RAM
Mount straight swing arm extension with 4" bolt |
|
|
|
 |
RAM-227U |
1/2" NPT hole with flange (swing arm). Fits 1.5" RAM balls. |
|
|
|
 |
RAM-BEARINGS1U |
RAM
Non-slip bearing kit for Swing Arms |
|
|
|
RAM
1.5" BALL & SOCKET COMPONENTS |
 |
RAM-KNOB5LU
Locking
Knob |
Use
to replace the wing nut on RAM 1.5" ball arms for security |
|
|
|
 |
RAM-111BU |
6
1/4" x 2" Base, with 1.5" ball |
|
|
|
 |
RAM-118BU |
RAM
saddle W/ 1.5" ball
The large U shaped cradle can strap around a 4" up to 6" pipe. Originally
design for strapping to a lantern base, this mount can also be used
as a base to strap to a round rail. |
|
|
|
 |
RAM-201-BU
2
1/4" Arm
|
Metal
arms with sockets for 1.5" RAM balls
Arm
lengths are measured centre-to-centre of ball fitting |
|
|
|
 |
RAM-201U
4
5/8"
Arm
|
|
|
|
 |
RAM-201-DU
7
7/8" Arm
|
|
|
|
 |
RAM-230U |
Connector
for 1.5" ball size arms: 2.15" centre-to-centre. |
|
|
|
 |
RAM-202U |
Circular
plate (dash base), with 1.5" ball |
|
|
|
 |
RAM-246U
|
4.75''
square VESA plate with 100mm + 75mm holes, with 1.5" ball
|
|
|
|
 |
RAM-2461U |
3
5/8" sq 75 mil base with 1.5" ball
|
|
|
|
 |
RAM-226U |
RAM
Aluminum 1.5'' Ball Umbrella Saddle on 1.5" ball |
|
|
|
 |
RAM-231U
(Unpacked) |
RAM
W/U-Bolt for 3/4" to 1" diameter rail (Unpacked = no packaging + lower cost) |
|
|
|
 |
RAM-233U |
RAM-233
Rail Mount Adapter Kit
U shaped rail adapter connects to a RAM round 2.5"
plate> Connecting hardware and rubber strip included to provide
grip on the rail. |
|
|
|
|
RAM
1.5" BALL NPT THREAD COMPONENTS |
 |
RAM-218-1U |
1.5"
Single Ball w/ 1/2'" NPT Hole
This connects to the series of RAM-PA82xx rigid
pipes. RAM-232-90 threaded base can be used to mount. |
|
|
|
 |
RAM-D-218-1U |
RAM
2.25'' Ball with female 1'' NPT Thread. Screws to the
top of RAM pipes that need a 2.25" ball attachment. |
|
|
|
 |
RAM-PA8206U
6 inch NPT pipe |
Rigid
pipes with 1/2" NPT thread.
Can
be used with RAM-218-1 ball to attach other 1.5" ball RAM
components.
RAM-282/RAM-284
pivot lock base can be used with RAM-PA82XXX pipes to create an
adjustable angle mount.
RAM-232-90
can be used for a 90 degree mount.
See
RAM-134-90 (above) for an example of RAM-218-1, RAM-PA8206 and
RAM-232-90 in use.
|
|
|
|
|
RAM-PA8209U
9 inch NPT pipe |
|
|
|
|
RAM-PA8212
12 inch NPT pipe |
|
|
|
|
RAM-PA8218U
18 inch NPT pipe |
|
|
|
 |
RAM-232-90U |
RAM
2 1/2' base w/ 1/2' NPT hole |
|
|
|
 |
RAM-282U |
RAM
Aluminum 5'' square Base Plate with Female Pivot Lock
Mounting hardware is not included.
Use with RAM-284 to create a pivot base for RAM-PA82xx
pipes. |
|
|
|
 |
RAM-284U |
RAM
Aluminum 1/2'' Female Pipe Clamp with Male Pivot Lock.
Use with RAM-282 and RAM-PA54xx
pipe to create an adjustable angle mount for 1.5" ball components.
|
|
|
|
100% Canadian. Canada's #1 GPS Store!
