| |
|
Touratech Mounts
for GPS 72, GPS 76, GPSMAP 76, GPSMAP 76S
The
Ultimate Mount for Dual-Sport, Dirt BIke, ATV, Snowmobile or Touring Motorcycle! |
Touratech's
exceptionally robust aluminium mounting cradles are made in Germany, especially
designed for motorcycle/off-road use and will protect the electronics of your
GPS and hold it securely under harsh riding conditons. Touratech mounts are vibration
isolated and include antenna support and damping for models with a removable antenna.
For
touring motorcycles where vibration may not be a serious concern, consider the
advantages of the high-tech good looks and practicality of Touratech mounts to
enhance the appearance and value of your motorcycle as well as to secure your
GPS. Touratech
cradles can be mounted directly on the crossbar of off-road bikes, fairing brace
or anywhere you have a 1/2" bar. For other installations, Touratech cradles
can also be mounted using a variety of RAM components
that can be attached to the flat baseplate of the cradle. Recommendation:
For dual sport use, dirt bikes, race bikes, or any other high vibration/high RPM
use, it is recommended that the motorcycle's 12 volt system is used to power the
GPS to avoid battery shutdown under vibration. |
 Click
here to view our user photos of Touratech mounts
in use
| |
*
To order Touratech mounts from the US we recommend you visit CycoActive;,
outside the Americas visit Touratech
AG
For mounting solutions for GPS models not featured here, consider a
secure RAM mounting system |
|
MODEL |
STATUS |
MFG
PART NO |
OUR
PRICE |
BUY
NOW! |
| •
Touratech mounts other than those featured on this page may be special
ordered for supply within Canada (see Touratech-USA
for details.) Please call 1-800-585-9331 or email
with your requirements. |
Touratech
GPS 76 series Mount
For Garmin GPS72, GPS 76, 76MAP, 76S.
Includes clamps for 1/2 inch crossbar
Can be used with RAM mounts (see below)
Please note: The new COLOR 76C and 76CS has a thicker case
(+2mm) and DOES NOT FIT in this mount. For color 76C and CS, use
065-0084 |
|
065-0036 |
$139.95
|
|
|
RAM
MOUNTING ATTACHMENTS |
Touratech
cradles can be mounted directly on the crossbar of off-road bikes,
fairing brace or anywhere you have a 1/2" bar. For other installations,
Touratech cradles can also be mounted using a variety of RAM
components that can be attached to the flat baseplate of the
cradle. The assemblies below are popular choices |
 |
RAM
diamond attachment, 3" arm,
2 1/2" dash mount base |
|
RAM-B-138 |
|
|
 |
RAM
diamond attachment, 3" arm,
zinc coated 1" U bolt |
|
RAM-B-149Z |
|
|
|
RAM
diamond attachment, 3" arm,
stainless steel 1" U bolt |
|
RAM-B-149 |
|
|
 |
RAM
Locking Knob
Use to replace the wing nut on RAM 1" ball arms for security
(e.g. when used with Touratech locking mounts) |
|
RAM-KNOB3L |
|
|
 |
Locking
Mount User Tip: A RAM mounted Touratech Locking Mount can be
made tamper-resistant by replacing the RAM arm easy adjust thumbscrew
with this Allen
key adjust security screw. Click
here for details (Allen key not included) |
|
T-GCSEC |
|
|
 |
10mm Spacer (Bolt not included). The 10mm spacer drops into the counterbore and is used with a bolt. |
|
T-GCMXB (Spacer) |
|
|
TOURATECH
POWER KITS |
 |
Motorcycle 12v Hardwire Power Kit: This Touratech GC12V motorcycle hardwire power kit contains everything you need to connect your Garmin GPS unit to your motorcycle and protect your connections from vibration: a 12V GPS power cord (5.5 ft long), battery terminal connectors, a blade-type fuse kit with two 2-Amp fuses, a cap for the plug, and a small container of dielectric grease |
T-GCSEC |
|
© 2001-2012
Mach Ten Enterprises Inc.
All rights reserved |
|
|
|
100% Canadian. Canada's #1 GPS Store!
