| |
|
Touratech Mount
for Garmin iQue 3600, MvG
The
Ultimate Mount for Dual-Sport, Dirt BIke, ATV, Snowmobile or Touring Motorcycle!
| |
Touratech's
vibration isolated aluminium mounting cradles are made in Germany, especially
designed for motorcycle/off-road use and will protect the electronics of your
GPS and hold it securely under harsh riding conditons. For
touring motorcycles where vibration may not be a serious concern, consider the
advantages of the high-tech good looks and practicality of Touratech mounts to
enhance the appearance and value of your motorcycle as well as to secure your
GPS. |
|
| The
Touratech 065-0078 mount fits the Garmin iQue 3600 only (does not fit other PDAs).
This is the most vibration-isolated mount available for the iQue.
• Includes
key-lock
• Provides very secure attachment
• MvG style (very
soft) vibration buffers mounts to 1/2 inch crossbar
• Has powercord support
to protect end and socket
It is very important to support this connection
as the handlebars sweep left and right. Mounting:
Touratech cradles can be mounted directly on the crossbar of off-road bikes, fairing
brace or anywhere you have a 1/2" bar. For other installations, Touratech
cradles can also be mounted using a variety of RAM
components that can be attached to the flat baseplate of the cradle. For use
with the 60C cradles the diamond
attachment must be modified as shown here Power
Recommendation: For dual sport use, dirt bikes, race bikes, or any other high
vibration/high RPM use, it is recommended that the motorcycle's 12 volt system
is used to power the GPS to avoid battery shutdown under vibration. |
Click
to view photo with iQue
(showing powercord support)
Photo of backside |
|
|
We ship these
mounts within Canada only. To order Touratech mounts from the US
we recommend you visit CycoActive;,
outside the Americas visit Touratech
AG
|
|
MODEL |
STATUS |
MFG
PART NO |
OUR
PRICE |
BUY
NOW! |
|
Touratech
Mount for Garmin iQue 3600
MvG |
|
065-0078 |
$149.95
|
|
|
RAM
MOUNTING ATTACHMENTS |
Touratech
cradles can be mounted directly on the crossbar of off-road bikes,
fairing brace or anywhere you have a 1/2" bar. For other installations,
Touratech cradles can also be mounted using a variety of RAM
components that can be attached to the flat baseplate of the
cradle. The assemblies below are popular choices. For use with the
60C cradles the diamond
attachment must be modified as shown here |
 |
RAM
diamond attachment, 3" arm,
2 1/2" dash mount base
|
|
RAM-B-138 |
|
|
 |
RAM
diamond attachment, 3" arm, zinc coated 1" U bolt |
|
RAM-B-149Z |
|
|
|
RAM
diamond attachment, 3" arm, stainless steel 1" U bolt |
|
RAM-B-149 |
|
|
 |
RAM
Locking Knob
Use to replace the wing nut on RAM 1" ball arms for security
(e.g. when used with Touratech locking mounts) |
|
RAM-KNOB3L |
|
|
 |
Locking
Mount User Tip: A RAM mounted Touratech Locking Mount can be
made tamper-resistant by replacing the RAM arm easy adjust thumbscrew
with this Allen
key adjust security screw. Click
here for details (Allen key not included) |
|
T-GCSEC |
|
|
 |
10mm Spacer (Bolt not included). The 10mm spacer drops into the counterbore and is used with a bolt. |
|
T-GCMXB (Spacer) |
|
|
|
© 2001-2012
Mach Ten Enterprises Inc.
All rights reserved |
|
|
|
100% Canadian. Canada's #1 GPS Store!
